The Tanbo 短 棒 is a round and short stick, 45-60 cm long.

This weapon is most often used in 'self-defense' to do armlocks and strikes, in the manner of the handling of arnis in Eskrima. There is no school of Tanbo alone, the handling is generally integrated into a more general practice as for some branches of Aikibudo.

We offer oak tanbo in a standard length of 50 cm.
We offer them in 2 diameters, 8bu (2.4 cm) and 9bu (2.7 cm).
The finish is neutral, with a natural surface finished with fine sandpaper.

Wood: Japanese Red Oak, Akagashi 赤 樫 - あ か が し
Origin: Kirishima Sankei Forest, Kagoshima Prefecture, South Kyushu.
Botanical Appellation: Quercus acuta
Tree growth time before felling for preparation and drying: 70 to 90 years
Shade: Red / Fiber: Spaced and Airy fibers / Weight: Medium / Resistance: Very good

Aramaki Workshop: “Aramaki Budogu Mokojo” 荒 牧 武 道 具 木 工 所
Miyakonojo, Miyazaki-Ken, Kyushu, Japan (Southwest).
It has existed for 100 years, founded by the Aramaki family around 1920.
Currently led by the 3rd generation Aramaki, Aramaki Yasuo, Artisan name Kazuhiro.
Recognitions, Titles: «Ō-ju Hōshō»* presented by the Emperor of Japan.
(“Ō-ju Hōshō” (黄 綬 褒 章): “Yellow Ribbon Medal” is awarded to “those who, through their diligence in their affairs, have become models for the people.” Created in 1887, it was immediately repealed and only restored in 1955.)

Message from Masamune team: The productions of the Aramaki workshop are incomparable, we consider it as the excellence of the workshops formalized by the Japanese government. In other words, only three official Japanese workshops remain to date and the Aramaki workshop is the only one that can produce enough for export outside Japan.
This workshop has kept a traditional manufacturing method, especially for the selection of wood species and parts, but also thanks to a natural drying that allows to preserve the fibres and the qualities of the wood. This traditional process makes it possible to obtain resistant, robust, pleasant and durable training weapons. The finish of the Aramaki workshop is also remarkable because after the shaping of the weapons using different types of planes, the craftsmen finish the surfacing with very fine sandpaper, giving a feeling of velvet texture.

Masamune Maintenance Tips:
Wooden weapons are ideal training products, but care must be taken, knowing how to preserve and maintain them for optimal safety and preservation. Wood, although "dead", remains a reactive material to variations in temperature and especially humidity.
- Keep weapons horizontally, preserving a stable and homogeneous moisture content throughout the piece of wood.
- Keep in a room that ‘breathes’, avoid cellars, attics, car chests.
- Do not leave near a source of heat, avoid leaving near a radiator, underfloor heating, or too regular exposure to the sun.
- Do not leave near a source of moisture, avoid leaving near entrance doors or windows.

Over time and especially in practice, wood fibres can be subject to alterations, in order to prevent or at least maintain degradation, you can:
- Apply additives such as beeswax or oils (e.g. flax) to the surface with a cloth
- Soak in oil for about 2 to 4 weeks, then ‘dry’ for 2 to 4 months. This process remains quite long and tedious, it adds weight to the weapon and can vary the balance.
- In case of surface deterioration, broken fibre, splinters, sand with sandpaper. Depending on the damage, you will sometimes have to remove a lot of material, then take different grains of paper, from the coarsest (50 to 100) to the finest (600 and more).

Finally, for your own safety, the safety of your partners and those around you, never practice with a cracked or even too fragile weapon. This can cause splinters, or splinters and parts that fly off on contact with another weapon, and injure people around them.